Pyrolytic Cleaning - AEG COMPETENCE B8879-4 User Information

Pyrolytic cleaning

1
Warning: The oven gets very hot during this process. Keep small chil-
dren away.
1
Important Before carrying out the pyrolytic cleaning process, all re-
movable parts, with the exception of the side rails, must be removed
from the oven.
3
If you use the oven shelf runners that are available as special accesso-
ries, these must be removed before pyrolytic cleaning.
If the oven shelf runners are still in place, 'C1' appears in the time dis-
play.
The pyroluxe process then cannot be started due to a safety cut-out
that protects the oven shelf runners.
Pyroluxe
1. First remove the worst of the residue manually.
2. Select oven function Pyroluxe ® Cleaning
– P1 appears in the temperature display.
– "3:15" appears in the time display,
– Cook time flashes for approx. 5 seconds.
Pyrolytic cleaning then starts.
3
The Oven Light does not work.
When the temperature set is reached, the door is locked.
The symbol
until the door is unlocked again.
Changing the length of the Pyroluxe
1. Proceed as described in the section Pyroluxe
2. As long as Cook time
roluxe using
"2:15" or "3:15".
Cook time
Pyrolytic cleaning then starts.
3
If Cook time
Select
3. When the pyroluxe is completed, press any button to end.
is activated and the bars of the heat indicator light up,
is flashing select the desired length of the py-
or :
flashes for approx. 5 seconds.
is no longer flashing, press the selection button
again and then perform the setting procedure.
.
49