Playing A Disc; Pausing Playback (Still Mode); Stopping Playback; Skipping To A Different Track - Akai AC-V6507D Owner's Manual

Mobile dvd entertainment system with dual lcd sreens
Table of Contents

Advertisement

DVD
CD
Basic playback
This owner's manual explains the basic instructions of this unit. Some DVD discs are produced
in a manner that allows specific or limited operation during playback. Such as, the unit may
not respond to all operating commands. This is not a defect in the unit. Refer to the instruction
notes of discs.
"
" may appear on the screen during operation. A "
not permitted by the unit or disc.

Playing a Disc

1.Slide the POWER ON/OFF switch on the right side of unit into ON mode.
See CUSTOMIZING THE FUNCTION SETTINGS (page 21 to 22) before proceeding to step 2.
2.Hold the top and slide the OPEN switch to open the disc door.
3.Hold the disc by its sides and carefully fit onto the central support of compartment with the label side facing
forward until you hear a "click".
4.Close the disc door.
It takes a short while for your unit to load the disc. After loading, for some discs, the unit will automatically start
playback of the disc.
5.Press the
PLAY button.

Pausing playback (still mode)

Press the
PAUSE button. To resume normal playback, press the
II
Each time you press the

Stopping playback

Press the
STOP button at the location where you want to interrupt playback. To resume playback at the position
where the disc was stopped, press the
If you press the
STOP button twice, the unit's memory will be cleared and pressing the
the disc to the beginning.
To skip to a different track
• Press the
PREV button repeatedly to skip to the start of the current or previous track.
• Press the
NEXT button to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump straight to that track number.
Fast Forward/Fast Reverse
1.Press the SEARCH
• The disc begins fast scan at x2 speed.
• Four speeds are available. Each time SEARCH
button is pressed, the speed of fast scan changes in the following
sequence:
Note:
You also can press and hold
2.Press the
PLAY button when you reach the desired point to resume playback at normal speed.
PLAYING A DISC
PAUSE button, the picture advances one frame.
II
PLAY button.
or
SEARCH button when a disc is playing.
/
(SKIP) buttons repeatedly to select different fast scan speeds.
" means that the desired operation is
PLAY button.
or
SEARCH
GB - 14
PLAY button will reset

Advertisement

Table of Contents
loading

Table of Contents