Pyrolytic Cleaning - AEG B8871-4 User Manual

48
Cleaning and care

Pyrolytic cleaning

Warning: The oven gets very hot during this process. Keep small children away.
Important! All removable parts including the side rails must be removed from
the oven before using the pyroluxe function.
If you use the oven shelf runners that are available as special accessories, these
must be removed before pyrolytic cleaning.
f the side rails/oven shelf runners are still in place, 'C1' appears in the time dis
play.
The pyroluxe process then cannot be started due to a safety cut out that pro
tects the side rails/oven shelf runners.
Pyroluxe
1. First remove the worst of the residue manually.
2. Select oven function Pyroluxe ® Cleaning
– P1 appears in the temperature display.
– "3:15" appears in the time display,
– Cook time flashes for approx. 5 seconds.
Pyrolytic cleaning then starts.
The Oven Light does not work.
When the temperature set is reached, the door is locked.
The symbol
door is unlocked again.
Changing the length of the Pyroluxe
1. Proceed as described in the section Pyroluxe
2. As long as Cook time
ing or
"2:15" or "3:15".
Cook time
Pyrolytic cleaning then starts.
If Cook time
again and then perform the setting procedure.
3. When the pyroluxe is completed, press any button to end.
Changing the Pyroluxe switch off time
The Pyroluxe switch off time can be changed using the clock function End
time (within 2 minutes of setting the Pyroluxe).
When are the different pyroluxes set:
– 2:15 = Pyroluxe Quick: for a light degree of soiling
– 3:15 = Pyroluxe Intensive: for a high degree of soiling.
is activated and the bars of the heat indicator light up, until the
is flashing select the desired length of the pyroluxe us
:
flashes for approx. 5 seconds.
is no longer flashing, press the selection button Select
.