Mounting Rear Surround Speakers; Turning On The Unit And Tv; Power Cord Connection - Akai DVR-3400SS Operator's Manual

Dvd home theater system

Hide thumbs Also See for DVR-3400SS:

Table of Contents

Mounting rear surround speakers

1) Mark the correct mounting position on the wall.

2) Insert a fixing screw(s) at the marked position on the wall.

3) Align the slot hole(s) of the speaker over the screw and pull the speaker downward until it is firmly hooked.

1)Press the POWER button to turn the Unit ON, or

2)Press the /POWER button on the remote control or the FUNCTION button or the

Unit while the Unit is at standby mode.

3)Turn on the TV by pressing its POWER button.

4)Select the channel on your TV corresponding to the VIDEO IN jack that the Unit is connected to. See TV User

guide for more information.

• If you have connected the Unit successfully, the DVD logo (start-up picture) will appear on your TV screen.

• Make sure that all the components and speakers are connected correctly.

• Be sure the AC power cord is disconnected and all functions are off before making connections.

• When you are not going to use the Unit for a long period of time, disconnect the power cord.

Setup

- 15 -

PLAY button to turn on the

Table of Contents