Connecting Another Source - Akai DVR-3400SS Operator's Manual

C. Connecting another source
Using the not supplied Audio/Video cable, connect ONLY the left and right AUDIO OUT jack on your Unit to the
AUDIO IN jack or use a coaxial digital Audio cable (not supplied) to connect to the coaxial in jack on your another
equipment. Do not connect the yellow video plug.
Listening to an other audio equipment
1. Turn on the Unit.
2. Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN
function.
Analogue connection
(y e llow )
Digital connection
Notes:
• If the external equipment is a television and this audio system is close to it, you may experience interference
if the tuner function is selected while the television is working.
• When you have selected TUNER function, sound will ONLY come from the front left, right speakers and
subwoofer.
• Ensure that a VCR connected to this Unit is set to stereo mode otherwise the activated speakers may be
different from those outlined in the table on page 17.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
• When playing VCR, press the FUNCTION button on the remote control or front panel to AV_IN mode, all
speakers will be activated a few minutes later.
DVD Unit
To A U D IO O U T
(r ed ) (w h ite)
DVD Unit
Setup
Amplifier of stereo
system, etc. (not included)
To A U D IO I N
(w h ite) (r ed )
Audio equipment with
digital audio input jack
- 12 -
AUDIO IN
(y e llo w )
COAXIAL
(continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page)