Table of Contents
Advertisement
Quick Links
PA26810A01
WGCT-A & WGCT-A/E
Rev. 04 5-2013
BATTERY OPERATED WYR-GRID CUTTER
OPERATION MANUAL
© Panduit Corp. 2013
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL
Website: www.panduit.com
Technical Support:
Email: techsupport@panduit.com
Tel: 888-506-5400, ext. 83255
EU Website:
www.panduit.com/emea
Panduit Europe • EMEA Service Center
Almelo, Netherlands
EU Email: emeatoolservicecenter
Tel: +31 546 580 452 • Fax: +31 546 580 441
@panduit.com
Advertisement
Table of Contents
Summary of Contents for Panduit WGCT-A
- Page 1 MUST READ INSTRUCTION MANUAL Website: www.panduit.com Technical Support: Email: techsupport@panduit.com Tel: 888-506-5400, ext. 83255 EU Website: www.panduit.com/emea Panduit Europe • EMEA Service Center Almelo, Netherlands EU Email: emeatoolservicecenter Tel: +31 546 580 452 • Fax: +31 546 580 441 @panduit.com...
-
Page 2: Table Of Contents
Charging the Battery ....................7 LED Work Light (white) .................... 7 LED Indicator (red) ....................7 Important Features of the WGCT-A and WGCT-A/E Wyr-Grid Cutter Tools ..7 Operating the Tool ....................8 MAINTENANCE / INSPECTION ...................... 8 Daily Maintenance ....................8 Monthly Maintenance .................... -
Page 3: Purpose Of This Manual
Safety Safety is essential in the use and maintenance of Panduit tools and equipment. This manual and any markings on the tool provide information for avoiding hazards and unsafe practices related to the use or service of this tool. Observe all of the safety information provided. -
Page 4: Precautions And General Guidelines
WGCT-A OPERATION MANUAL © Panduit Corp. 2013 WGCT-A/E PRECAUTIONS AND GENERAL GUIDELINES Important Safety Information SAFETY ALERT SYMBOL This symbol is used to call your attention to hazards or unsafe practices which could result in an injury or property damage. The signal word, defined below, indicates the severity of the hazard. The message after the signal word provides information for preventing or avoiding the hazard. - Page 5 WGCT-A OPERATION MANUAL © Panduit Corp. 2013 WGCT-A/E WARNING Wear eye protection when operating or servicing this tool. Failure to wear eye protection could result in serious eye injury from flying debris or hydraulic oil. WARNING Skin Injection Hazard: DO NOT use hands to check for oil leaks. High pressure oil easily punctures skin causing serious injury, gangrene, or death.
- Page 6 WGCT-A OPERATION MANUAL © Panduit Corp. 2013 WGCT-A/E CAUTION • DO NOT operate the tool without cutting blades. Damage to the piston or cutting head can result. • DO NOT twist work piece or tool during cutting operation. Blade failure could result.
-
Page 7: Identification
Flashes current status of tool (see chart on Page 7) 9. Retract Button Button to open the cutting blades in case of an error or emergency WGCT-A and WGCT-A/E Tools The tools include: • 1 – Battery Operated Cutter Tool (with battery cartridge) •... -
Page 8: Tool Specifications
0.45 kg / 1.0 lb. (approx..) 30 min. (approx.) ® Refer to Makita Operator’s Manuals which are supplied with battery cartridge and charger. WGCT-A (USA) Battery Charger WGCT-A/E (EUR) Battery Charger Makita® Battery Charger Makita® Battery Charger Part No.: DC18RA Part No.: DC18RA230... -
Page 9: Operation
20 seconds when trigger is released Circuit has become too hot Important Features of the WGCT-A and WGCT-A/E Wyr-Grid Cutter Tools • The hydraulic unit incorporates an automatic retraction which returns the piston and movable blade to the starting position when the maximum cutting force is achieved. -
Page 10: Operating The Tool
© Panduit Corp. 2013 WGCT-A/E • The cutting head of the WGCT-A and WGCT-A/E have been designed to turn 350° around the longitudinal axis in order to gain the best access to tight corners and other difficult working areas. Operating the Tool Check cutting head to ensure the piston and movable blade are fully retracted. -
Page 11: Cutting Blade Replacement
© Panduit Corp. 2013 WGCT-A/E Cutting Blade Replacement Panduit part number CD-WGCD-1 (Wyr-Grid Replacement Cutting Die) is used as replacement for worn or damaged cutting blades. IMPORTANT Relief valve adjustments must be done by Panduit Tool Solutions Division (USA), or Panduit EMEA Service Center (EUR). -
Page 12: Discontinuation Of Use / Disposal
WGCT-A OPERATION MANUAL © Panduit Corp. 2013 WGCT-A/E Pull trigger and hold retract button Cold oil simultaneously to warm oil. Store tool in warm area. Problem Probable Cause Probable Remedy Oil level is low. Return tool to Panduit. Dies stop during Pull trigger and hold retract button operation.