Panduit DFCT Operation Instructions

DUCT FINGER
CUTTING TOOL
Cuts P Wide Finger
ANDUCT
Wiring Duct; and removes
NR1 Nylon Rivets
Part No. DFCT
OPERATION INSTRUCTIONS
WARNING
SAFETY GLASSES MUST BE
WORN AT ALL TIMES WHEN
USING THE DFCT TOOL.
USE CARE WHEN HANDLING
TOOL; BLADE IS SHARP!
CAUTION
This precision tool has been engineered and
designed for use with P Plastic Wiring Duct;
ANDUCT
and to remove NR1 Nylon Rivets.
It is not intended for use on any other products or
materials.
Website: www.panduit.com
Email: cs@panduit.com
DFCT
DUCT FINGER CUTTING TOOL OPERATION INSTRUCTIONS
© Panduit Corp. 2005
DFCT TOOL
Heavy duty steel
construction
Page: 1 of 2
USING DFCT TO REMOVE DUCT FINGER
Step 1
Cut once to
remove top half
of finger
Step 2
Spring open
handles
Cut again at
level of sidewall
continued on Page 2
PA23893A01
Rev.: 01 3-2005
For Technical Support:
888-506-5400, ext. 3255
Fax: 630-759-7532