Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Panduit DP4X00H-PCUT
Summary of Contents for Panduit DP4X00H-PCUT
- Page 1 Instructions Perforation Cutter DP4X00H-PCUT MADE IN GERMANY...
- Page 2 Edition: 09/2024 - Part No. DP4X00H-PCUT-EN Copyright This documentation as well as translation hereof are property of Panduit Corporation. The replication, conversion, duplication or divulgement of the whole manual or parts of it for other intentions than its original intended purpose demand the previous written authorization by Panduit Corporation.
-
Page 3: Table Of Contents
Table of Contents Introduction ..................4 Instructions ..................4 Intended Use ...................5 Safety Instructions ................6 Environment ..................6 Mounting ..................7 Operation ..................9 Preparation ..................9 Standard Operation .................9 Adjusting Cutter Settings with Printer LCD ......10 Cleaning ..................11 Error Messages ................11 Approvals ..................12... -
Page 4: Introduction
Introduction Instructions Important information and instructions in this documentation are designated as follows: Danger! Draws attention to an exceptionally great, imminent danger to your health or life due to hazardous voltages. Danger! Draws attention to a danger with high risk which, if not avoided, may result in death or serious injury. -
Page 5: Intended Use
Introduction Intended Use • The device is intended exclusively as an option for the printers of the DP4300H, DP4600H, and DP4300HD series for perforating and cutting suitable materials that have been approved by the manufacturer. Any other use or use going beyond this shall be regarded as improper use. The manufacturer/supplier shall not be liable for damage resulting from unauthorized use;... -
Page 6: Safety Instructions
Introduction Safety Instructions • Disconnect the printer from the electrical outlet before mounting or removing the cutter. • The cutter may only be operated when it is mounted on the printer. • Risk of injury, particularly during maintenance, the cutter blades are sharp. •... -
Page 7: Mounting
Mounting Removing Cover Loosen screw (1) and remove cover (2). Leave the tear-off plate (3) mounted on the printer. Attention! For cutter operation there has to be mounted the dispense plate on the printer, to lead the material through the blades of the cutter. - Page 8 Mounting Mounting Cutter Attention! Disconnect the printer from the electrical outlet before mounting or removing the cutter. Insert the pins (3) of the cutter (5) into the holes (1) of the printer. Press the cutter against the printer. That way the plug of the cutter will be connected to the peripheral port (2) of the printer.
-
Page 9: Operation
Operation Preparation Insert labels for tear-off mode Refer to operation manual for more details. Place the media strip between the printhead and the drive roller, so that the front edge of the strip reaches through the cutter. Standard Operation ... -
Page 10: Adjusting Cutter Settings With Printer Lcd
Adjusting Cutter Settings with Printer LCD Note! Cutter settings are for a specific printer and cutter combination. Changing the cutter may require re-adjustment to the cutter settings. Cutter control is handled by printing from Easy-Mark Plus labeling software. Cut Parameters ... -
Page 11: Cleaning
Cleaning Warning! Disconnect the printer from the electrical outlet. Attention! Risk of injury. The cutter blades are sharp. 1. Remove the cutter from the printer. 2. Clean cutter with PTR-CLN cleaning kit. 3. Reattach cutter to printer. Error Messages Error message Cause Remedy... -
Page 12: Approvals
Approvals Reference to the EU Declaration of Conformity and other approvals: https://www.panduit.com/DP4X00H NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the DP4X00H-PCUT and is the answer not in the manual?
Questions and answers