Table of Contents
Advertisement
3
Input Select
• Select [Component 1 or Component 2] by
• Each time you press the "COMPONENT"
• N.B. : You cannot select component
4
NOTES:
1) Possible digital broadcasting signals: 1080i, 720p, 576p, 480p.
2) Antenna connection:
Apartment : Check if communal aerial receives digital broadcasts.
Private Houses: Set the indoor/outdoor UHF antenna to the direction
of the digital broadcasting transmitting company.
3) For detailed connection method, refer to the owner's manual of Digital
Broadcasting Receiver.
4) What is a component? : Signals with which luminance and
chrominance are separated, producing a sharp picture.
5) If the Digital Broadcasting Receiver has PC output terminal or DVI
output terminal, connect to 'PC INPUT' or 'DVI INPUT' at the rear of
the panel of the PDP.
pressing the "COMPONENT" button of the
remote control or using the "INPUT SELECT"
button of the PDP unit.
button, different input modes appear. The
sequence is as follows:
Component1
Component2
inputs if the picture in picture
mode is on.
Select the Desired Channel and Function
• Select the desired channel and function
by using the remote control of the Digital
Broadcasting Receiver.
27
Advertisement
Table of Contents
