Table of Contents
Advertisement
7. Install the plastic cover (A), removed
from the top of the packaging, to the
bottom of the appliance. Remove the
adhesive strip and close the bottom of
the appliance. Attach permanently the
plastic cover to the bottom of the appli-
ance with the small plastic caps that
you can find in the user manual bag.
8. Pull up the appliance in vertical posi-
tion.
9. Remove the four bolts with a key. Pull
out the plastic spacers. Remove the
power supply cable and the drain hose
from the hose holders.
10. Replace the plastic spacers with the
large plastic caps. You can find these
large caps in the user manual bag.
Positioning and levelling
• Install the appliance on a flat hard floor.
• Make sure that carpets do not stop the
• Make sure that the appliance does not
• Loosen or tighten the feet to adjust the
A
2
1
• The appliance must be level and stable.
Warning! Remove all the packaging
and the transit bolts before you install
the appliance.
We recommend that you keep the
packaging and the transit bolts for
when you move the appliance.
air circulation below the appliance.
touch the wall or other units
level. A correct adjustment of the appli-
ance level prevents the vibration, noise
and the movement of the appliance when
in operation.
Caution! Do not put cardboard, wood
or equivalent materials below the
appliance feet to adjust the level.
electrolux 17
x4
x4
Advertisement
Table of Contents
