Table of Contents
Advertisement
10 electrolux
2. Pull out the detergent divider from its
position (A).
A
3. Put it into the special guides in the mid-
dle of the compartment for the washing
phase.
When you use the detergent
divider:
– Do not use gelatinous or thick liquid
detergents.
– Do not put more liquid detergent
than the edge of the detergent divid-
er.
– Do not set the prewash phase.
– Do not set the delay start function, if
it is available.
4. Measure out the detergent and the fab-
ric conditioner.
5. Carefully close the detergent dispenser.
Setting and starting a programme
1. Turn the programme knob and set the
washing programme.
2. The Start button indicator is off.
3. Set the available functions.
When you press the relevant button,
the indicator of the set function comes
on.
4. Press the Start button to start the pro-
gramme until the button indicator is on.
Cancel a programme
1. Turn the programme knob to
cancel the programme and to deacti-
vate the appliance.
2. Turn the programme knob again to ac-
tivate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the wa-
ter.
Change a function
You can change only the delay and spin
function before they operate.
Press the related button to set the new val-
ue.
Set the delay start
1. Press the delay start button again and
again until to set the correct delay.
2. Press the start button, the appliance
starts the countdown of the delay start.
The related indicator flashes while the
start button indicator is off.
When the countdown is completed, the
programme starts automatically and
the indicator of the start button indica-
tor comes on.
You can cancel or change the set of
the delay start also when the appliance
starts the countdown.
Cancel the delay start
Press the delay start button again and
again until all the indicators are off.
The programme starts and the start button
indicator comes on.
Open the door
While a programme operates, the appliance
door is locked.
To open the appliance door:
1. Turn the programme knob to
activate the appliance.
2. Wait for some minutes before to open
the appliance door.
3. Close the appliance door.
4. Set the programme again.
to
to de-
Advertisement
Table of Contents
