2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information Washing programmes Product description Care and cleaning Control panel What to do if… First use Technical data Daily use Installation Helpful hints and tips...
Page 3
3 occur to the product and to property if • Never use the appliance if the power this is not adhered to. See relevant sec- supply cable, the control panel, the work- tion in the user manual. ing surface or the base are damaged so •...
4 electrolux PRODUCT DESCRIPTION Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Its new washing system allows to- tal use of detergent and reduces water consumption so saving energy.
5 Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain re- mover used during the stain action phase (if available). The prewash and soak detergent is added at the beginning of the wash pro- gramme.
Page 6
6 electrolux No spin performed. This option is recommended for people who are allergic to detergents, and By selecting this option, all spinning phases in areas where the water is very soft. are suppressed and replaced by a drain, so as not to wrinkle the laundry.
7 FIRST USE • Ensure that the electrical and water ECO valve. Then run a cotton cycle connections comply with the installa- at the highest temperature without tion instructions. any laundry in the machine, to re- • Remove the polystyrene block and move any manufacturing residue any material from the drum.
Page 8
8 electrolux will automatically select the maximum spin Select the Delay Start by pressing value provided for the programme you have button 6 chosen. You can change this value by Before you start the programme, if you wish pressing the corresponding button. The...
9 To restart the programme from the point at After closing the door, it is necessary to se- which it was interrupted, press the button 5 lect the programme and options again and again. If you have chosen a delayed start, to press button 5.
Page 10
10 electrolux Removing stains The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, Stubborn stains may not be removed by etc.), the colour, washing temperature and just water and detergent. It is therefore ad- degree of soiling.
11 WASHING PROGRAMMES Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry SPIN COTTONS NO SPIN 95°-60° RINSE HOLD Main wash - Rinses PREWASH Long spin at maximum spin speed DAILY Max.
Page 12
12 electrolux Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry SPIN DELICATES NO SPIN 40°-30° RINSE HOLD Main wash - Rinses PREWASH Maximum spin speed 700 rpm DAILY Max. load 3 kg- Reduced load kg 1,5 SUPER QUICK Delicate fabrics: acrylics, viscose, polyester.
13 Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry = OFF For cancelling the programme which is running or to switch the machine off . 1) If you select the Super Quick option by pressing button 3, we recommend that you reduce the maximum load as indicated.
Page 14
14 electrolux Door seal Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. Clean the chamber of dispenser drawer with a brush. Drain pump The pump should be inspected regularly and particularly if: •...
Page 15
15 3. Open the pump door levering on the 6. When no more water comes out, un- groove with a coin (or with the suitable screw the pump cover by turning it an- tool, that you can find in the bag con-...
Page 16
16 electrolux 9. Replace the filter into the pump by in- 11. Close the pump door. serting it correctly into the special guides. Screw the pump cover firmly by turning it clockwise. Warning! When the appliance is in use and depending on the programme selected there can be hot water in the pump.
17 5. Unscrew the hose from the machine. 6. clean the pump if necessary as previ- Keep a rug nearby because some water ously described; may flow. 7. screw the pump again and close the 6. Clean the filter in the valve with a stiff door.
Page 18
18 electrolux • 1 flash = «The machine does not fill», ble cause/Solutions» box and restart the follow the corresponding suggestions in programme. «Possible cause/Solutions» box and re- Once the problem has been eliminated, start the programme. press the button 5 to restart the pro- •...
Page 19
19 Problem Possible cause/Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fit- tings.
20 electrolux If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, se- rial number and purchase date of your ma- chine: the Service Centre will require this information.
Page 21
21 2. Remove the power supply cable and the 4. Slide out the relevant plastic spacers. draining and inlet hose from the hose holders on the rear of the appliance. 5. Fill the smaller upper hole and the two...
Page 22
22 electrolux vibration, noise and displacement of the 2. The other end of the inlet hose which machine during operation. connects to the machine can be turned as showed in the picture. Caution! Never place cardboard, Do not place the inlet hose downwards.
Page 23
23 • In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. • Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm.