Disconnecting The Nexstar Sx - Vantec NEXSTAR SX Owner's Manual

6. Disconnecting the Nexstar SX:

Nexstar SX External 2.5" HDD Enclosure:
Warning: NEVER remove the Nexstar SX while the hard drive is in use. Doing so
may corrupt the data on the hard drive or damage the hard drive, Nexstar SX, or
computer.
Windows 98SE/ME/XP/2000/Vista:
1) Make sure all operations using the hard drive within the Nexstar SX have
ceased.
2) Close any windows and programs pertaining to the Nexstar SX.
3) If connected by USB, double click the green "Unplug or Eject Hardware" icon
in the system tray and select [Safely Remove Hardware]. Select the device
you wish to remove and click on [Stop]. The system should prompt,"It is now
safe to remove the USB device." If not, wait for any programs still using the
device to finish and try again.
4) Unplug the mini USB-B connector from the Nexstar SX
5) Unplug the USB/Power cable from the system.
Disconnecting the Nexstar SX
12