Table of Contents
Advertisement
16
Washing programmes
To activate the multitab function:
• Press the multitab button. The multitab indicator light comes on.
To deactivate the multitab function:
• Press the multitab button. The multitab indicator light goes off.
Do these steps if the drying results are not satisfactory:
1. Fill the rinse aid dispenser with rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position 2.
• You can only activate or deactivate the rinse aid dispenser when the multitab function
is activated.
To activate/deactivate the rinse aid dispenser:
The appliance must be switched off.
1. Press and hold function button A. Turn the programme knob counterclockwise until
the programme marker agrees with the first washing programme on the control panel.
2. Release function button A when the display shows the water hardness level.
3. Turn the programme knob counterclockwise until the programme marker agrees with
the second washing programme on the control panel.
4. The digital display shows the current setting for the rinse aid dispenser.
5. Press function button A to change the setting. The digital display shows the new setting.
6. Turn the programme knob to the off position to save the operation.
To use normal detergent again:
1. Deactivate the multitab function.
2. Fill the salt container and rinse aid dispenser.
3. Adjust the water hardness setting to the highest level.
4. Do a washing programme without dishes.
5. Adjust the water softener to the water hardness in your area.
6. Adjust the rinse aid dosage.
Washing programmes
Washing programmes
Programme and pro-
gramme knob posi-
tion
NORMAL 65°
Degree of soil
Normal soil
Rinse aid dispenser deactivated
Rinse aid dispenser activated
Type of load
Crockery and cut-
lery
Programme description
Prewash
Main wash up to 65°C
1 intermediate rinse
Final rinse
Drying
Advertisement
Table of Contents
