Throttle - Honda CRF250R 2005 Owner's Manual

Throttle

Refer to Safety Precautions on page 19.
Throttle Freeplay
(1)
(1) freeplay
Inspection
Check freeplay (1).
Freeplay: 1/8 - 3/16 in (3 - 5 mm)
If necessary, adjust to the specified range.
Upper Adjustment
Minor adjustments are generally made with the
upper adjuster.
(2)
(+)
(4)
(2) dust cover (+)increase
(3) lock nut (–)decrease
(4) upper adjuster
46
Servicing Your Honda
1. Pull the rubber dust cover (2) back.
2. Loosen the upper lock nut (3).
3. Turn the upper adjuster (4).
Turning the adjuster in direction (–) will
decrease freeplay and turning it in direction
(+) will increase freeplay.
4. Tighten the lock nut. Return the dust cover to
its normal position.
5. After adjustment, check for smooth rotation of
the throttle grip from fully closed to fully
open in all steering positions.
If the adjuster is threaded out near its limit or
the correct freeplay cannot be reached, turn
the adjuster all the way in and back out one
turn. Tighten the lock nut, install the dust
cover and make the adjustment with the
lower adjuster.
(3)
(–)
Lower Adjustment
The lower adjuster is used for major freeplay
adjustment, such as after replacing the throttle
cables or removing the carburetor. It is also used
if you can not get the proper adjustment with the
upper adjuster.
(–)
(5)
(+)
(5) lock nut (+) increase
(6) adjuster (–) decrease
1. Remove the fuel tank (page 30).
2. loosen the lock nut (5).
3. Turn the adjuster (6) in direction (–) to
decrease freeplay, and in direction (+) to
increase freeplay.
4. Tighten the lock nut.
5. Operate the throttle grip to ensure that it
functions smoothly and returns completely.
6. Install the fuel tank (page 31).
If you can't get the freeplay within the specified
range, contact your Honda dealer.
(6)