Advanced Chipset Features - Gigabyte Processor Motherboard GA-7N400S-L User Manual

2-3

Advanced Chipset Features

System Performance
FSB Frequency
x Memory Frequency
Resulting Frequency
AGP Frequency
: Move Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power end-user use only.
System Performance
Normal
Turbo
Manual
FSB Frequency
100MHz
133MHz
166MHz
200MHz
Memory Frequency
By SPD
50% ~ 200%
Auto
Resulting Frequency
The value depends on FSB/Memory Frequency settings.
AGP Frequency
Normal
50MHz ~ 100MHz Set AGP frequency manually.
(Note) If you want to use EasyTune utility, please set Memory Frequency to Auto. You also have to use DDR
memory module(s) with frequencies equal to or faster than the FSB frequency of the CPU you install. For
example, when using a CPU with 333Mhz FSB, you have to install DDR333 or DDR400 memory module(s).
GA-7N400S(-L) Motherboard
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Advanced Chipset Features
[Normal]
[100MHz]
By SPD
266MHz
[Normal]
+/-/PU/PD: Value
F6: Fail-Save Defaults
Set system at the most stable settings. (Default value)
Use overclock settings for higher performance but with higher risk of instability.
Allows full customization of performance options.
Set FSB frequency at 100MHz. (Default value)
Set FSB frequency at 133MHz.
Set FSB frequency at 166MHz.
Set FSB frequency at 200MHz.
(Note)
Set memory frequency by SPD. (Default value)
Set memory frequency manually.
Set the best memory frequency for system.
Set the best AGP frequency for system. (Default value)
- 34 -
Item Help
Menu Level
[Normal]
Use the most stable settings
[Turbo]
Use over clocked settings for
higher performance but with
higher risk of instability
[Manual]
Allows full customization of
performance options
Advanced users only
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help