Advanced Bios Features - Gigabyte Processor Motherboard GA-7N400S-L User Manual

2-2

Advanced BIOS Features

Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Boot Up Floppy Seek
Password Check
Init Display First
: Move Enter: Select
F5: Previous Values
Hard Disk Boot Priority
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list. Press
<ESC> to exit this menu.
First / Second / Third Boot Device
Floppy
LS120
Hard Disk
CDROM
ZIP
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
LAN
Disabled
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is 40
tracks 720K, 1.2M and 1.44M are all 80 tracks.
Enabled
Disabled
GA-7N400S(-L) Motherboard
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Advanced BIOS Features
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Disabled]
[Setup]
[PCI Slot]
+/-/PU/PD: Value
F6: Fail-Save Defaults
Select your boot device priority by Floppy.
Select your boot device priority by LS120.
Select your boot device priority by Hard Disk.
Select your boot device priority by CDROM.
Select your boot device priority by ZIP.
Select your boot device priority by USB-FDD.
Select your boot device priority by USB-ZIP.
Select your boot device priority by USB-CDROM.
Select your boot device priority by USB-HDD.
Select your boot device priority by LAN.
Select your boot device priority by Disabled.
BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that
BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are all 80 tracks.
BIOS will not search for the type of floppy disk drive by track number. Note that
there will not be any warning message if the drive installed is 360K. (Default
value)
- 32 -
Item Help
Menu Level
Select Hard Disk Boot
Device Priority
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help