Roland BK-9 Performance Editor User Manual page 9

Switching the D-BEAM part ON/OFF
The D-BEAM part ON/OFF button works slightly different from the others, since you will need to choose your desired
type of function [DJ GEAR], [SFX], [INST] and [CTRL].
1.
Press the "Off" field to switch the D-BEAM part ON .
A pop-up window appears with four buttons.
Each button represents a family of effects/functions ([DJ GEAR], [SFX], [INST] and [CTRL]).
Each family contains a series of different effects/functions. You can choose one at a time. The currently selected one is
displayed in the right-hand fields.
2.
Press one of the four D-BEAM buttons .
3.
To change the effect/function, touch the field on the right-hand side of the needed D-BEAM family button and
select any other one available in the displayed list .
For details see "Using the D-BEAM Controller" in the BK-9 owner's manual.
Writing TEXT information
The so-called "BK – TEXT INPUT" function comes in very handy every time you need to smoothly write some kind of text
in your BK-9.
1.
Press the small keyboard button on the right side of the page .
A full keyboard will appear on your iPad: use it to type any kind of text you need to enter in your BK-9.
2.
To exit this function, press either the small keyboard button on the right side of the page again or the key in the
bottom right corner .
MIXER PAGE
9