HAND CONTROLS PAGE
This page collects all those functions involving hand controllers, like Pitch Bend/Modulation lever as well as the
Assignable Switches. Of course, you can make separate settings for every real time keyboard part.
How to control Portamento
1.
Use the slider switch and knob to set the Portamento Mode and Time for any part you wish .
How to set the Pitch Bender
1.
Use the slider switch and knob to choose your desired pitch bender assignment and the corresponding range for
any part you wish .
How to assign Modulation
1.
Use the slider switches to specify how any part you wish should respond to modulation messages (CC01) .
How to make the Sliders CC1, CC2, CC3 control sounds
1.
Press the CC1, CC2 or CC3 field and choose the fundamental sound elements you wish to assign to any of these
three sliders located under the display area .
If you do not need this kind of control during your performance, choose "OFF".
20