Parallel Port - Gigabyte Pentium 4/D Processor Motherboard GA-5EASV-RH User Manual

Parallel Port

This allows users to configure parallel port by using this option.
Enabled
Disabled
Mode
This option allows user to set Parallel Port transfer mode.
Bi-directional
EPP
ECP
Base I/O Address
378
278
Iterrupt
IRQ5
IRQ7
PS/2 Mouse
Set this option 'Enabled' to allow BIOS support for a PS/2 - type mouse.
Enabled
Disabled
Enable the configuration.
Disable the configuration. (Default value)
Use this setting to support bi-directional transfers on the parallel
port. (Default value)
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port.
Set IO address to 378
Set IO address to 278.
Set Interrupt as IRQ5. (Default value)
Set Interrupt as IRQ7. (Default value)
'Enabled' forces the PS/2 mouse port to be enabled regardless if a
mouse is present. (Default value)
'Disabled' prevents any installed PS/2 mouse from functioning,
but frees up IRQ12.
3 9
BIOS Setup