Electrical Connection - Beko WMD 25080 R User Manual

4. Electrical connection

Connect the power cord to the appropirate electrical sys-
tem which is being supported by the maximum voltage and
current rating indicated on the rating plate placed inside the
kick plate.
Look! Page 1, Steps before operating Fullautomatic Wash-
ing Machine and safety precautions.
Make sure that you have grounded power outlet.
Attention! Before any operation of the machine check the
following.
• Did you close the front door?
• Is the tap open?
• Is water drain hose placed properly?
• Is power connected?
22