Gigabyte GA-8IP775 Series User Manual page 37

On-chip SATA
Disabled
Auto
Manual
SATA Port0 Configure as
IDE Pri. Master
IDE Pri. Slave
IDE Sec. Master
IDE Sec. Slave
SATA Port0
SATA Port1
SATA Port1 Configure as
The values depend on SATA Port0.
USB Controller
Enabled
Disabled
USB 2.0 Controller
Disable this function if you are not using onboard USB 2.0 feature.
Enabled
Disabled
USB Keyboard Support
Enabled
Disabled
USB Mouse Support
Enabled
Disabled
AC97 Audio
Enabled
Disabled
Onboard H/W LAN
Enabled
Disabled
Onboard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Disabled
Enabled
(*) Only for GA-8IP775-G.
Disable SATA controller.
When there is no device to be plugged in IDE1 or IDE2, SATA controller
will remap to IDE controller. (Default value)
Set SATA Mode manually.
Remap SATA Port 0 to IDE Pri. Master.
Remap SATA Port 0 to IDE Pri. Slave.
Remap SATA Port 0 to IDE Sec. Master.
Remap SATA Port 0 to IDE Sec. Slave.
SATA controller set to SATA port0. As this mode, it support by WinXP or
later OS only. (Default value)
SATA controller set to SATA port1. As this mode, it support by WinXP or
later OS only.
Enable USB Controller. (Default value)
Disable USB Controller.
Enable USB 2.0 Controller. (Default value)
Disable USB 2.0 Controller.
Enable USB Keyboard Support.
Disable USB Keyboard Support. (Default value)
Enable USB Mouse Support.
Disable USB Mouse Support. (Default value)
Enable onboard AC'97 audio function. (Default Value)
Disable this function.
*
( )
Enable Onboard H/W LAN function. (Default value)
Disable this function.
*
( )
Disable this function. (Default Value)
Enable this function.
- 37 - BIOS Setup