Transport Protection - Asko W6022 Use & Care Manual

Transport protection

Before the machine is used, the three
transport protection devices should be
removed as shown below.
Each transport protection device consists
of a screw, a washer, and a rubber spacer.
The rubber spacers are used after removal
to cover up the transport protection device
holes.
1. First remove the screws and remove the
washers.
2. Then remove the rubber spacers.
1
3. Finally, the rubber spacers should be
turned over and replaced in the transport
protection device holes.
Custumer Care Center
1-800-898-1879
www.askousa.com
21