Asko W6022 Use & Care Manual page 19

Water intake error
If L4 is flashing, there is a fault with water
supply. Check:
- that the tap on the water pipe is open.
- that the filter in the machine's water in-
take is not blocked.
1. Shut off the water tap.
2. Unscrew the hose
3. Clean the filter in the intake valve on the
machine.
4. Screw the hose back on.
5. Turn on the water tap.
6. Run the program again to check if the
error has been fixed.
7. If the error remains, contact the Custom-
er Care Center at the number listed at the
bottom of this page.
Door opening error.
If L6 is flashing, contact Customer Care
Center at the number listed at the bottom
of this page.
Overflow.
If all the red fields around the Start/Stop and
Key Button (door opening) are blinking,
there is too much water in the machine.
1. Shut off the water tap.
2. Contact the Customer Care Center at the
number listed at the bottom of this page.
Custumer Care Center
1-800-898-1879
19
www.askousa.com