Frequency/Voltage Control - Gigabyte GA-8I915ME Series User Manual

2-7

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
CPU Clock Ratio
Memory Frequency for
Memory Frequency (Mhz)
: Move Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power end-user use only.
CPU Clock Ratio
(Note)
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
Memory Frequency for
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency=533MHz,
2.5 Memory Frequency = Host clock X 2.5.
3 Memory Frequency = Host clock X 3.
4 Memory Frequency = Host clock X 4.
Auto Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=800MHz,
1.66 Memory Frequency = Host clock X 1.66.
2.00 Memory Frequency = Host clock X 2.00.
2.66 Memory Frequency = Host clock X 2.66.
Auto Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on "System Memory Multiplier" item.
(Note) This item will show up when you install a processor which supports this function.
GA-8I915ME Series Motherboard
Frequency/Voltage Control
[16X]
[Auto]
333
+/-/PU/PD: Value F10: Save
F6: Fail-Save Default
- 46 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults