Advanced Bios Features - Gigabyte GA-8I915ME Series User Manual

2-2

Advanced BIOS Features

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
# CPU Hyper-Threading
Limit CPUID Max. to 3
Init Display First
(Note1)
No-Execute Memory Protect
CPU Enhanced Halt (C1E)
CPU Thermal Monitor 2(TM2)
CPU EIST Function (Note3)
On-Chip Frame Buffer Size
: Move Enter: Select
F5: Previous Values
" # " System will detect automatically and show up when you install the Intel
processor with HT Technology.
Hard Disk Boot Priority
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list. Press
<ESC> to exit this menu.
First / Second / Third Boot Device
Floppy
LS120
Hard Disk
CDROM
ZIP
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
LAN
Disabled
Password Check
Setup
System
(Note3) This item will show up when you install a processor which supports this function.
GA-8I915ME Series Motherboard
Advanced BIOS Features
[Press Enter]
[Floppy]
[USB-FDD]
[Hard Disk]
[Setup]
[Enabled]
[Disabled]
[PCI]
(Note3) [Enabled]
(Note3) [Enabled]
(Note3) [Enabled]
[Enabled]
[4MB]
+/-/PU/PD: Value
F6: Fail-Save Default
Select your boot device priority by Floppy.
Select your boot device priority by LS120.
Select your boot device priority by Hard Disk.
Select your boot device priority by CDROM.
Select your boot device priority by ZIP.
Select your boot device priority by USB-FDD.
Select your boot device priority by USB-ZIP.
Select your boot device priority by USB-CDROM.
Select your boot device priority by USB-HDD.
Select your boot device priority by LAN.
Disabled this function.
The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)
The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
- 38 -
Item Help
Menu Level
Select Hard Disk Boot
Device Priority
F10: Save ESC: Exit
F7: Optimized Defaults
®
F1: General Help
Pentium 4
®