Manual Setup; Amp Assign - Denon AVR-X2000 Owner's Manual

Contents

Manual Setup

Perform when setting the speakers manually or when changing settings
made in Audyssey® Setup.
• If you change the speaker settings after performing Audyssey® Setup, it
will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic
EQ® and Audyssey Dynamic Volume® (vpage 133, 134).
• "Manual Setup" can be used without changing the settings. Please set
if necessary.
Front panel Display
Connections Playback
Rear panel
Settings

Amp Assign

Select power amplifier usage method to match your speaker system.
2 Assign Mode
Set the assignment mode.
Surround Back : Setting for 7.1-channel playback using surround back
speakers.
ZONE2 (Default) : Setting to assign the unit's built-in power amplifier
for ZONE2 and output the audio in stereo.
Bi-AMP : Setting to use the front speakers via the bi-amp connection.
Front B : Setting to use the second set of front speakers for playback.
You can switch the front speakers A and B to be used for
playback in accordance with the 2-channel playback or multi-
channel playback mode. When you select this Front B setting,
also perform the "Front Speaker Setup" (vpage 160)
procedure.
Front Height : Setting for 7.1-channel playback using front height
speakers.
155
Remote
Tips Appendix
Index