Table of Contents
Advertisement
2-4
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
ACPI Suspend Type
Soft-Off by Power button
PME Event Wake Up
Modem Ring On
USB Resume from Suspend
Power-On by Alarm
x Day of Month Alarm
x Time (hh:mm:ss) Alarm
Power On By Mouse
Power On By Keyboard
x KB Power ON Function
AC BACK Function
: Move
Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS)
Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR)
Set ACPI suspend type to S3/STR(Suspend To RAM).
Soft-Off by Power button
Instant-off
Press power button then Power off instantly. (Default value)
Delay 4 Sec
Press power button 4 seconds to Power off. Enter suspend if button is pressed
less than 4 seconds.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled
Disable this function. (Default value)
Enabled
Enable PME as wake up event.
Modem Ring On
An incoming call via modem can awake the system from any suspend state.
Disabled
Disable Modem Ring on function. (Default value)
Enabled
Enable Modem Ring on function.
USB Resume from Suspend
Disabled
Disable this function. (Default value)
Enabled
Enable USB device wake up system from suspend type.
Power Management Setup
[S1(POS)]
[Instant-off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: Value
F10: Save
F7: Optimized Defaults
- 37 -
Item Help
Menu Level
ESC: Exit
F1: General Help
BIOS Setup
Advertisement
Table of Contents
