Refresh-charging:
LIGHT ON CHARGER
RED light blinks
1.
0.9 sec "on" / 0.1 sec "off"
2.
3.
GREEN light burns
4.
RED light burns
RED light blinks slowly
5.
2 sec "on" / 2 sec "off"
Step 10. Disconnect the power source plug from the electric point.
Step 11. Disconnect the charger plug from the battery.
Step 12. Mount the battery onto the bicycle (step 2 and 1 in
reversed order). Make sure that the battery is secured
in "LOCK" position, so that it cannot move sideways.
5.1.4 Energy indicator
The amount of energy available is indicated via a Light Emitting Diode (LED) string, located on the battery.
(see fig. 18 and
29). The indicator will illuminate when you push the "PUSH" button. When fully charged, all
five LEDs will be illuminated. As energy is used, less LEDs are illuminated. The light of the LEDs will go out
after a few seconds.
HOW LONG DOES IT TAKE ? WHAT'S HAPPENING ?
Just a few moments
Push "REFRESH" button on the charger
10 hours max.
4~5 hours max.
Until the power source plug is
disconnected
Pag. 17.
Charging will start soon
("waiting")
Discharging / refreshing
Charging
Charging completed !
("completion")