Table of Contents
Advertisement
Recording menu [Rec Menu]
Press the REC ( s) button again.
3
• The blinking message [Standby]
appears in the display, and the LED
indicator light flashes.
• Recording starts automatically if the
input is louder than the voice sync
level.
TIP
• The voice recorder automatically ends
recording and returns to recording
standby mode when the input sound
has been below the voice sync level
5
for at least the set detection time.
Each time the voice recorder enters
standby mode, the current file is closed.
Recording continues in a new file the
next time sound is detected.
• Press the STOP ( 4) button to end a
voice sync recording session.
NOTE
• The following function is disabled
when using the [V-Sync. Rec] function:
• [VCVA] (☞ P.65)
EN
68
Advertisement
Table of Contents
