Olympus WS-833 User Manual page 27

Recording
Sound files recorded with the voice
recorder are automatically given a file
name in the format below.
131001 _ 0001.WMA
1 2
1 Date recorded
Indicates the year, month and day the
recording was made.
2 File number
Appended file numbers are
consecutive regardless of whether the
recording media has been switched.
3 Extension
A file extension indicating the
recording format the file was recorded
in by the voice recorder.
• Linear PCM format: ".WAV"*
• MP3 format: ".MP3"
• WMA format: ".WMA"
* WS-833 and WS-832 models only
TIP
• [Rec Mode] must be set with the voice
recorder stopped (☞ P.81).
• Pressing the REC ( s) button while
[Recorder] is selected on the [Home]
screen will allow you to start recording.
The recorded file will be saved to
[Folder A].
WS-833 model only
• You can record radio broadcasts by
selecting [FM Radio] mode (☞ P.56).
• You can adjust the recording level
manually to match your application
(☞ P.63).
NOTE
• To prevent the beginning of the
recording being cut off, start recording
after the LED indicator light has lit or
mode indicator has appeared in the
display.
• When the remaining possible recording
3
time is 60 seconds, the LED indicator
light starts flashing. It flashes more
rapidly as the remaining time decreases
(at the 30- and 10-second points).
• When [Folder full] appears, no more
recording can be done. To record more,
you will need to select a different folder
or delete unneeded files (☞ P.46).
• If [Memory full] appears, the voice
recorder has no more available
memory space. You will need to
delete unneeded files to record more
(☞ P.46).
• When using a microSD card in the voice
recorder, be sure the desired recording
media setting ([Internal memory]
or [microSD card]) has been selected
(☞ P.77).
• If a folder other than folders & to * is
selected when the REC ( s) button is
pressed, the blinking message [Cannot
record in this folder] appears. Redo
the recording operation after selecting
one of folders & to *.
• It's recommended to initialize the
recording media before making an
important recording.
• Processing performance may
be reduced when data has been
repeatedly written to or deleted from
the recording media. Please initialize
the recording media in this case
(☞ P.91).
2
EN
27