NETGEAR JR6150 User Manual page 42

3. Click the Next button.
You can use either the push button or PIN method.
4. Select either the Push Button or PIN Number radio button.
• To use the push button method, either click the WPS button on this screen, or press
the WPS button on the side of the router. Within two minutes, go to the wireless client
and press its WPS button to join the network without entering a password.
• To use the PIN method, select the PIN Number radio button, enter the client security
PIN, and click the Next button.
Within two minutes, go to the client device and use its WPS software to join the
network without entering a password.
The router attempts to add the WPS-capable device. The WPS LED on the front of the
router blinks green. When the router establishes a WPS connection, the LED is solid
green, and the router WPS screen displays a confirmation message.
Step 2
5. Repeat through
A750 Wireless Dual Band Gigabit Router JR6150
Step 4
to add another WPS client to your network.
genie ADVANCED Home
42