Table of Contents
Advertisement
View Logs of Web Access or Attempted Web Access
A log is a detailed record of the websites that users on your network have accessed or
attempted to access. If you have set up content filtering on the Block Sites screen, the Logs
screen shows you when someone on your network tried to access a blocked site. If you have
email notification on, you receive these logs in an email message. If you do not have email
notification set up, you can view the logs here.
To view the logs:
1.
Log in to the router.
For more information, see
2.
Select ADVANCED > Administration > Logs.
The Logs screen shows the following information:
•
Source IP. The IP address of the initiating device for this log entry.
•
Target address. The name or IP address of the website or news group visited or to
which access was attempted.
•
Action. The action that occurred.
•
Date and time. The date and time the log entry was recorded.
3.
Do any of the following:
•
To refresh the log screen, click the Refresh button.
•
To clear the log entries, click the Clear Log button.
•
To email the log, click the Send Log button.
To specify logs settings:
1.
Log in to the router.
For more information, see
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
Use NETGEAR genie after Installation
Administration
100
on page 17.
on page 17.
Advertisement
Table of Contents
Troubleshooting
