Factory Default Settings - NETGEAR JR6150 User Manual

Factory Default Settings

Table 3. Router default settings
Feature
Router login URL
Login name (case-sensitive)
Login password (case-sensitive)
WAN MAC address
MTU size
LAN IP address (gateway IP address)
Router subnet
DHCP server
DHCP range
Time zone
Adjust for daylight saving time
Allow a registrar to configure this router
Wireless communication
Preset SSID
Security option password
Wireless access list (MAC filtering)
Broadcast SSID
Transmission speed
Country/Region
RF channel
Operating mode
Data rate
Output power
A750 Wireless Dual Band Gigabit Router JR6150
Default Setting
http://www.routerlogin.net or http://www.routerlogin.com
admin (printed on product label)
password (printed on product label)
Default hardware address (printed on product label)
1500
192.168.1.1 (printed on product label)
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
GMT or other time zone settings based on your product SKU
Disabled
Enabled
Enabled
NETGEARxx (xx refers to two random digits)
Preset password (printed on product label)
All wireless stations allowed
Enabled
Auto
Maximum wireless signal rate derived from IEEE Standard 802.11
specifications. Actual throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building
materials and construction, and network overhead lower actual
data throughput rate.
United States in NA only; otherwise, varies by country and region
Auto until region selected
2.4 GHz 300 Mbps and 5 GHz 450 Mbps
Best
Full
Supplemental Information
154