ActionTec GT724WG User Manual page 3

2. Select Network and Internet Connections.
Note:
If you do not see Network and Internet Connections, skip to Step 3.
3. Click Internet Options.
4. Select the Connections tab.
5. Select Never Dial a Connection.
6. Click LAN Settings.
7. Verify all boxes are unchecked and click OK.
8. Click OK.
9. Verify that your computer is set to Obtain an IP Address Automatically (follow the steps for your OS below).
To verify Local Area Network (LAN) configurations:
Windows 7:
1. Select the Start Circle, then in the Start Search field, type "Network and Sharing".
2. Select Network and Sharing Center.
3. Select Change adapter settings.
4. Right-click Local Area Connection and click Properties.
5. Highlight (do not uncheck) Internet Protocol TCP/IP Version 4.
6. From the dropdown list, select Properties.
7. Make sure Obtain IP Address Automatically and Obtain DNS Server Addresses Automatically are
selected, and then click OK.
8. Click Close.
Windows Vista:
1. Select the Start Circle. Then type "Network and Sharing" in the Start Search field.
2. Select Choose Network and Sharing Center.
3. Select View Status next to Local Area Connection.
4. Select Properties.
5. Highlight (do not uncheck) Internet Protocol TCP/IP Version 4.
6. Select Properties.
7. Make certain Obtain IP Address Automatically and Obtain DNS Server Addresses Automatically
are selected, and then click OK.
8. Click Close.
1-888-850-5915
Technical Support
Actiontec GT724WG Router
Setup and User Guide
2
103948/3-11/6960