Table of Contents
Advertisement
4.1.1 System General Setup
1.1.1 System General Setup – Basic Setup
Device Name & Description
For identifying a particular outdoor access point.
System Operation Mode
AP can operate in either bridge mode or router mode. Note that when the AP is configured to operate in
bridge mode, all four interfaces operate as bridge. When it is operating in route mode, all interfaces will
belong to different IP subnet.
NetBIOS Filter
When enabled, each client cannot be seen on MicroSoft Network Neighborhood.
Wireless Trunk
Wireless Trunk mode will be allow user to aggregate multi wireless interfaces into one virtue wireless
interface to achieve increasing point to point bandwidth and fail-over between various physical interfaces.
By select different wireless trunk mode, namely Round Robin, Load Balance, One-way Transmit and
Fail-over, to meet the system requirement.
1.1.2 System General Setup – DC-MESH Setup
Advertisement
Table of Contents
