Irq Resources [Press Enter]; Pci/Vga Palette Snoop [Disabled]; Assign Irq For Vga [Enabled]; Assign Irq For Usb [Enabled] - Asus P5VDC-TVM SE User Manual

2.8.4

IRQ Resources [Press Enter]

This item becomes configurable only if the Resources Controlled By item is set to
[Manual]. This allows you to assign each system interrupt a type, depending on the
device using the interrupt.
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
: Move Enter:Select
F5: Previous Values
IRQ-xx assigned to [PCI Device]
When set to PCI device, the specific IRQ is free for use of PCI/PnP devices.
When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration
options: [PCI Device] [Reserved]
2.8.5

PCI/VGA Palette Snoop [Disabled]

Some non-standard VGA cards, like graphics accelerators or MPEG video
cards, may not show colors properly. Setting this field to [Enabled] corrects this
problem. If you are using standard VGA cards, leave this field to the default setting
[Disabled]. Configuration options: [Disabled] [Enabled]
2.8.6

Assign IRQ For VGA [Enabled]

Configuration options: [Disabled] [Enabled]
2.8.7

Assign IRQ For USB [Enabled]

Configuration options: [Disabled] [Enabled]
2.8.8

INT Pin x Assignment [Auto]

Assigns INT assignment for specific devices.
Configuration options: [Auto] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]
ASUS P5VDC-TVM SE
Phoenix - AwardBIOS CMOS Setup Utility
IRQ Resources
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
+/-/PU/PD:Value
F6: Fail-Safe Defaults
Item Specific Help
Legacy ISA for devices
compliant with the
original PC AT bus
specification, PCI/
ISA PnP for devices
compliant with the
Plug and Play standard
whether designed
for PCI or ISA bus
architecture
F10:Save&Exit ESC:Exit
F9: Optimized Defaults
Select Menu
F1:General Help
2-21