Power Management Setup; Acpi Function [Enabled]; Acpi Suspend Type [S3(Str)] - Asus P5VDC-TVM SE User Manual

Onboard Parallel Port [378/IRQ7]
Allows you to set the base address of the onboard parallel port connector.
Configuration options: [Disabled] [378/IRQ7] [278/IRQ5] [3BC/IRQ7]
Parallel Port Mode [ECP]
Allows you to set the operation mode of the parallel port.
Configuration options: [SPP] [EPP] [ECP] [ECP+EPP]
ECP Mode Use DMA [3]
Allows you to select the ECP Mode. This item becomes configurable only if the
Parallel Port Mode is set to [ECP] or [ECP+EPP].
Configuration options: [1] [3]
2.7

Power Management Setup

The Power Management Setup menu items allow you to change the settings for
the Advanced Power Management (APM) and Advanced Configuration and Power
Interface (ACPI).
ACPI Function
ACPI Suspend Type
Off by Power Button
x Resume by PCI PME
Resume by Ring
Resume by USB (S3)
Resume by PCI-E Device
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
Power On By Mouse
Power On By Keyboard
State After Power Failure
: Move Enter:Select
F5: Previous Values
2.7.1

ACPI Function [Enabled]

Allows you to enable or disable ACPI support for operating system.
Configuration options: [Enabled] [Disabled]
2.7.2

ACPI Suspend Type [S3(STR)]

Allows you to select the ACPI state used for system suspend.
Configuration options: [S1(POS)] [S3(STR)]
ASUS P5VDC-TVM SE
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
[Enabled]
[S3(STR)]
[Instant-Off]
Disabled
[Disabled]
[Enabled]
[Disabled]
[Disabled]
0
0 : 0 : 0
[Disabled]
[Disabled]
[Off]
+/-/PU/PD:Value F10:Save&Exit
F6: Fail-Safe Defaults
Select Menu
Item Specific Help
Enable/Disable ACPI
support for Operating
System.
ESC:Exit F1:General Help
F9: Optimized Defaults
2-17