Suction Inspection - Pentax EPK-P Owner's Manual

Suction Inspection

1
Press the suction control valve of the scope down
completely and verify that water is being sucked into
the distal end of the scope. (Refer to Figure 3.6)
• Perform this operation on an endoscope with an instrument
channel.
Only perform an endoscopic examination if all the inspected items are working properly. If any of the above functions
are not working properly or you feel there is an abnormality, stop using the scope immediately and contact PENTAX
service.
Suction
Figure 3.6
Pre-use Inspections
3
23