Quick Start; Set The Clock And Go - TOTALINE 1 For All Owner's Manual

Quick Start

Set the Clock and Go

SET CLOCK
Press the SET CLOCK
button.
:
12:00
Setup
Am
Setup
M
Press the SET CLOCK
button as above to
return to normal
operation.
This thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.
* The thermostat is not preprogrammed from the
factory to operate electric heat or heat pump systems.
To control these systems, follow the steps in the
Advanced Setup section, pages 12 & 13.
During Setup & Programming:
Pressing the Mode button
selects different flashing items.
(Represented in dark black)
Pressing the Up and Down
i
buttons will modify the flashing
selection.
Press
MODE
2
SET CLOCK
Page 5
To adjust the
clock or Day use
buttons.