Drum Filter; Sampler Instrument; Edit Sampler - Aurora Sound Studio HD User Manual

Drum Filter

The drum filter works in a similar manner to the VCF found on the Synthesizer
instrument. The filter can be utilized by both Automation and XY modes to product real-
time filtering effects.

Sampler Instrument

A sampler is a type of instrument that can be assigned to a layer. It uses a small sound
sample which is optionally looped and pitch shifted to create its sound.
You can modify its ADSR, VCF and LFO settings as well as assign your own samples.
Use the 'Edit Instrument' option on the 'Edit menu to make changes to a sampler. This
option is only available in Advanced Mode.
A sampler instrument is less CPU intensive than a synthesizer, but samples don't sound
so great when pitch shifted more than an octave.

Edit Sampler

The sampler uses a small static audio sample which it pitch shifts to the required note.
You can create your own instruments by assigning files on your device or by recording
your own sound samples.
The octave, semitone and detune settings are used to tune the sample, and the level can be
used to control the overall instrument volume.
Loop: Turns on and off sample loop points.
Edit LP: Allows you to edit the loop points of the current sample.
Save Patch: Saves the drum kit as a new or modified patch.
Revert: Abandons changes and loads the last saved patch settings.
Rec: Allows you to record a sample from the built in microphone.
Assign: Allows you to load a sample stored on your iPhone.
See also: ADSR Settings, VCF Settings, LFO Settings and Sample Recorder
16