Mitsubishi Electric LT-46149 Owner's Manual page 85

Appendix F: Troubleshooting, continued
Reset Name When to Use
Control-Panel To re-enable the
Lock Release control-panel buttons
after activation of the
Control-Panel Lock
System Reset If the TV does not turn
on or off, does not
respond to the remote
control or control-
panel buttons, or has
audio but no video.
TV Reset
To reset all consumer-
IMPORTANT: accessible settings
and all memories to
Use this reset
the original factory
only if all other
defaults.
resets have
been unsuc- CAUTION: All owner-
cessful. performed setups
and adjustments will
be erased, includ-
ing NetCommand IR
setups.
Service and Customer Support
Service
If you are unable to correct a problem with your TV,
consult your Mitsubishi dealer or Mitsubishi Con-
sumer Relations at (800) 332-2119.
• DO NOT adjust any controls other than those
described in this Owner's Guide.
• DO NOT remove the protective back cover of
your TV.
How to Use
Press and hold the MENU button
on the control panel for over eight
seconds. This works even if the TV
is powered off.
Press the SYSTEM RESET button on the
control panel.
1.
While viewing the TV, press
to display the TV Main menu.
2. With the Main menu displayed,
press number keys 1 2 3 to
display the Reset menu.
3. READ THE ON-SCREEN
WARNING AND INSTRUC-
TIONS.
• If you do not wish to use this
reset, press EXIT or MENU to
back out.
• If you do wish to use the
reset, press ENTER to erase all
memories and settings.
Customer Support
• To order replacement or additional remote
controls or Owner's Guides, visit our website at
www.mitsuparts.com or call (800) 553-7278.
• For questions:
Appendices
Resulting Action
Allows the control panel to be
unlocked if the remote control is
misplaced.
The TV will turn off and the green
LED will flash quickly for about
one minute. When the green LED
stops flashing, you may turn on the
TV. The changes you made most
recently, before using SYSTEM RESET,
may be lost. Changes you made
previously, however, are not lost.
MENU
The TV will start the initialization
process. The TV will then turn off
and the front green LED will start
flashing. When the LED stops
flashing, you can turn the TV on
again. The Parental Lock Pass
code will remain unaffected, but
all other memories and settings
outlined in this Owner's Guide
will need to be set again.
Call Consumer Relations at 800-332-2119.
E-mail: MDEAservice@mdea.com
Website: www.mitsubishi-tv.com
85