•
Press
to switch this product
•
between the working mode and the
normal standby mode, or
•
from the eco power standby mode to
the working mode.
Set the clock
Note
•
During setting, if no action is made within 90 seconds,
the product exits clock setting without saving earlier
operations.
1
In standby mode, press and hold CLOCK
to enter the clock setting mode.
or
»
2
Press + VOL - or
, and then press CLOCK.
or
•
: 24-hour time format
•
: 12-hour time format
» The hour digits begin to blink.
3
Press + VOL -or
and then press CLOCK.
» The minute digits begin to blink.
4
Press + VOL - or
minute, and then press CLOCK.
5
Press + VOL - or
or
CLOCK.
•
station that transmits time signals, the
product automatically synchronizes its
clock with the RDS station.
•
clock automatically.
» The set clock is displayed.
Tip
•
This product will synchronize its clock with the current
DAB station or the connected iPod/iPhone/iPad.
is displayed.
/
to select
/
to set the hour,
/
to set the
/
to select
, and then press
: When you tune to an RDS
: Not synchronize the
Select a source
On the product, press SOURCE repeatedly to
select a source.
•
connected iPhone/iPod/iPad
•
: the audio input through the
AUDIO IN socket
•
: the disc in the disc compartment
•
: .mp3 files stored on the connected
USB storage device
•
: the DAB tuner
•
: the FM tuner
You can also press source buttons on the
remote control to select a source.
•
FM/DAB: the FM tuner or DAB tuner
DOCK/CD: the playlist on the connected
•
iPhone/iPod/iPad or the disc in the disc
compartment
•
AUDIO IN/USB: the audio input through
the AUDIO IN socket, or the .mp3 files
stored on the connected USB storage
device
Adjust the brightness of LCD
display
1
In normal standby mode, press and hold
DISPLAY until
displayed.
2
Press VOL +/- or
, or
: the playlist on the
,
, or
/
to select
.
EN
is
,
9