3 Get started
Always follow the instructions in this chapter in
VHTXHQFH
Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Connect power
Caution
Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the device.
Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Note
The type plate is located on the bottom of the docking
system.
Connect the power adapter to:
the DC IN socket of the docking system.
the wall socket.
Turn on
Press .
» The docking system switches to the last
selected source.
Switch to standby mode
Press
again to switch the docking system to
standby mode.
» [OFF] appears for one second, then the
clock (if set) is displayed.
Set clock
1
Press
to switch the device to standby
mode.
2
Press and hold SET TIME for two seconds
to activate clock setting mode.
» The hour and minute digits begin to
blink.
3
Press
/
and
the hour and minute.
4
Press SET TIME WR FRQÀUP
» [12H] or [24H] begins to blink.
5
Press
/
to select 12/24 hour format.
6
Press SET TIME WR FRQÀUP
» The set time is displayed.
Select source
Press SOURCE repeatedly to select a source:
bluetooth, FM tuner, or MP3 link.
Note
When an android phone is docked, the system
automatically switches to bluetooth mode.
/
repeatedly to set
EN
11