Mute Low - BT 200 User Manual

18 Using your BT Digital Baby Monitor 200
Once the Mute Low sound
threshold has been exceeded,
baby sounds will be able to be
heard for a further six seconds
even if they do not reach the
Mute Low threshold.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp

Mute Low

For discreet operation, when you do not wish to
hear any low level sounds, you can still monitor
your baby using the Baby sound level LED indicators
(page 15).
When Mute Low is switched on, any sounds from
the Baby unit to the Parent unit will be muted
unless a sound is made above a set level. The set
level are sounds that are louder than the first two
green LEDs would register, as described in 'Baby
sound level indications' on page 15. If the Parent
unit receives sound up to the level of the first two
LEDs then they will turn amber but no sound will be
heard, if the sound rises above this level then the
unit will un-mute so you can hear the sounds.
1. To switch Mute Low on, press the
located on the top of the Parent unit. The Mute
indicator will turn amber.
2. To switch Mute Low off, press the
The amber indicator will switch off.
button
button again.