Remove The Optical Drive - HP ProLiant ML350p Gen8 User Manual

To remove the component:
Do one of the following:
1.
For tower models, open and remove the bezel
o
For rack models, if installed, remove the security bezel (on page 21).
o
Power down the server (on page 20).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
4.
For tower models, place the server on a flat, level surface with the access panel facing up.
o
For rack models, extend the server from the rack (on page 24).
o
Remove the access panel (on page 23).
5.
Remove the air baffle (on page 25).
6.
Remove the fan cage.
7.

Remove the optical drive

The server supports both DVD-ROM and DVD-RW drives.
Do one of the following:
1.
For tower models, open and remove the bezel
o
For rack models, if installed, remove the security bezel (on page 21).
o
Power down the server (on page 20).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
For tower models, do the following:
4.
("Remove the tower bezel" on page 21).
("Remove the tower bezel" on page 21).
Operations 28