HP 2610-48 Specification page 43

QuickSpecs
Accessory Product Details
HP X410 1U Universal 4-
post Rack Mounting Kit
(J9583A)
To learn more, visit: www.hp.com/networking
© Copyright 2007, 2010, 2011, 2012, 2013, 2014 Hewlett-Packard Development Company, L.P. The information contained herein is
subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be
liable for technical or editorial errors or omissions contained herein.
Notes
Services
DA - 13032 North America — Version 19 — January 17, 2014
The rack mounting kit supports the 1U, full width switches in the following
switch series and the power supply: V1810 Series, E2510 Series, E2520 Series,
E2610 Series, E2810 Series, E2910 Series, E3500 Series, and the E620 Power
Supply
This universal rack mounting kit is design to fit the following racks: HP 10K
10642, HP 10K 10842, Panduit CN, Panduit CS, Wrightline Vantage S2, APC
Netshelter 600mm, and APC Netshelter 800mm. It may well fit many other
brands and models too.
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 2610 Switch Series
www.hp.com/networking/services for details on
Page 43