Table of Contents
Advertisement
sAdjusting loudness
Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.
1 Press 5 or ∞ to select "LOUDNESS" from the AUDIO MENU, and press A.MENU
(AUDIO) button.
2 Press 5 to turn loudness on.
Loudness level (e.g., LOUDNESS:ON/MODE:MID) appears in the display.
3 Press 2 or 3 to select the level.
LOW - MID - HIGH
4 Press ∞ to turn loudness off.
sUsing subwoofer output
Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) is equipped with a subwoofer out-
put which can be switched on or off.
1 Press 5 or ∞ to select "SUB WOOFER" from the AUDIO MENU, and press A.MENU
(AUDIO) button.
When the subwoofer controller setting is S.W. CONTROL:EXTERNAL, you cannot
select SUB WOOFER.
2 Press 3 to turn subwoofer output on.
➲
You can turn off subwoofer output by pressing
select "PHASE", "LEVEL" or "FREQUENCY".
3 Press 5 or ∞ to select the item you want to adjust.
4 Press 2 or 3 to adjust the item.
PHASE :
LEVEL :
FREQUENCY : 50Hz - 80Hz - 125Hz
➲
Only frequencies lower than those in the selected range are output from the subwoofer.
sUsing non fading output
When the non fading output setting is on, the audio signal does not pass through Pioneer AV
Head Unit's (AVH-P6400CD or AVH-P6400R) low pass filter (for the subwoofer), but is out-
put through the RCA output.
When the non fading output is on, you can adjust the level of non fading output.
148
NORMAL - REVERSE
+6 - -6
2 2 2 2
. If you do not set to "ON", you cannot
Advertisement
Table of Contents
