Fujitsu PRIMERGY TX200 S7 System Configurator And Order-Information Manual page 7

Start PRIMERGY TX200 S7
I
Section Basic unit
System unit, Rack and Floorstand, including:
* Two lockable front covers in floorstand version
* backplane with 4 (LFF) or 8 (SFF) bays for hot-plug HD's. Type depending on base unit:
* PSU and Fan Type depending on base unit:
* 3 bays 5.25" for accessible drives (half Hight)
Systemboard D3099 with:
* Up to two Xeon 4C, 6C & 8C CPU`s (Socket-B2)
with 1 serial QPI link ( Quick Path Interconnect ) and 3 memory channels per CPU
First CPU has to be selected for an orderable basic unit,
* Chipset Intel® C600 Series (codenamed Patsburg)
* 6 PCI slots:
- No mix of registered and unbuffered modules is allowed
- First Memory ( one module ) has to be selected for an orderable basic unit per CPU
- Memory upgrade is possible module wise for the Independent Channel Mode or
for the Performance Mode,
- Memory mirrroring is supported with 2 identical modules in channel B+C CPU 1 or E+F CPU 2
- Hot Spare Memory is supported with 3 identical modules in channel A+B+C CPU 1 or D+E+F CPU 2
- SDDC (Chipkill) is supported only for registered memory modules,
* 6-port SATA controller on-board included in Intel Southbridge Patsburg A for SATA Raid0/1,
Max. 4 SATA / SAS HD`s are supported
Max. 2 SATA accessible drives are supported (DVD, Backup)
* 2x1 Gbit Ethernet LAN on board ( Intel Hartwell);
iSCSI boot integrated in System BIOS as selectable option
* iRMC S3 (integrated Remote Management Controller) on-board server management controller
with dedicated 10/100 Service LAN-port and
integrated graphics controller ( max. Resolution: 1600 x 1200 at 16 bpp)
The Service LAN-port can be switched alternatively on standard Gbit LAN port
Interfaces:
* 1x RS-232-C (serial, 9pin) (usable for BMC or OS or shared)
* 1x VGA (15 pin)
* 9x USB 2.0 (UHCI ) with 480MBit/s (4x external at the rear, 2x external at the frontside, 3x internal for backup or UFM)
* 2x LAN RJ45, 1x Service-LAN RJ45
*internal Cables:
1. SATA cable for CD/DVD.
2. Cable for HDD Backplane
3. USB cable (if USB Backup is used)
* ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates
* Documentation engl. (multilingual on CD)
A
Door #1 for accessible drive bays
Door #2 for hot plug HDD bays
Both doors may be locked or door #1 may be left open while door #2 is still locked
Type 1: 4x hot plug LFF (3.5") SAS/SATA HDD (SAS/SATA LFF base units only)
Type 2: 8x (2x4) hot plug SFF (2.5") SAS HDD (SAS SFF base units only)
Type 1: standard PSU and standard Fans (3 System Fans)
(V101and V301, V501 and V701 base units)
Type 2: without PSU (450W or 800W must be added), but 1 additional fan for redundancy
(V201, V401, V601 and V801 base units)
for Type 1 base units there is an upgrade to
hot plug redundant PSU and redundant Fans available
- 2x PCIe-3 x16
- 2x PCIe-3 x4 (mechanically x8)
- 1x PCIe-2 x4 (mechanically x8)
- 1x PCI 32/33
optional Southbridge Patsburg B with 4 ports for SAS RAID 0/1
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX200 S7 Status 2014-01-30
7 of 28