Fujitsu PRIMERGY TX200 S7 System Configurator And Order-Information Manual page 20

K
2.5" HDDs for SFF base units; SAS or more than 4 SATA HDDs require a RAID Controller! See section VIII internal Disk Array
Up to 8 SFF (2.5") hard disks can be configured.
With the HDD Extension Box Option D up to 16 SFF (2.5") hard disks can be configured.
With the HDD Extension Box Option D 2 hardware based RAID controllers have to be configured.
The On board SATA Controller can be used with up to 4x 2.5" SATA HDDs (no additional controller required)
If a SAS based backup is configured, then the 4 onboard SATA ports for HDDs are not available any more!
In this case for any HDD solution a PCI based 8port RAID controller is necessary!
For up to 4x 2.5" SAS HDDs with RAID 0/1 functionality a Patsburg Upgrade Kit is required (no SAS tape option)
For up to 4x 2,5" HDDs in combination with a SAS tape or for all other HDD configurations a PCI based
RAID-controllers is required;
Mixed configurations with Eco SATA drives and SAS drives are not allowed
2.5" SAS drives and 2.5" BC SATA drives can be mixed, but not used in one logical RAID volume
Hot replace is only possible running RAID.
Mixed configuration 2.5" BC-SATA/BC-SAS with SAS 10K (S26361-F4483-E130/E145/E160) drives not allowed.
2.5" SAS drives and 2.5" BC SATA drives can be mixed, but not used in one logical RAID volume
S26361-F2826-E426
SFF (2.5") HDD-Box for additional
8x SFF (2.5") SAS hard disks
1x
Occupies 2x 1.6" bays
in the accessible bay area
3.2 * 5.25", satin black bezel
max. 1x per system
S26361-F2826-E140
Trigger to request a PCI SAS Controller
for configuring more than 4
max. 1x per system
S26361-F4541-E100
SSD SAS 100GB, SLC
Solid State Disk, SAS 6Gb/s
Enterprise Perfomance
High Endurance **
hot plug/hot replace tray
max. 8/16x per system
S26361-F4581-E100
SSD SAS 100GB, MLC
Solid State Disk, SAS 6Gb/s
Enterprise Performance
Mainstream Endurance *
hot plug/hot replace tray
max. 8/16x per system
Solid State Disk Drive, Mainstream Endurance*
SSD SAS 12Gb/s 2.5" with hot plug/hot replace tray
200GB, Enterprise Performance
400GB, Enterprise Performance
800GB, Enterprise Performance
1.6TB, Enterprise Performance
max. 8/16x per system
K1
For the 8x 2.5" HD Extension Box
2 PCI based modular RAID controller is necessary
see Section VIII
For a later configuration of more than 4 SATA HDDs, the trigger is not necessary
In this case it is sufficient to implement a SAS controller!
SATA HDDs It is not allowed to connect the SATA HDDs to different controllers
In case of running more than 4 HDDs, all of them have
as long as stock
S26361-F4541-E400
SSD SAS 400GB, SLC
Solid State Disk, SAS 6Gb/s
Enterprise Perfomance
High Endurance **
hot plug/hot replace tray
max. 8/16x per system
as long as stock
S26361-F4581-E200
SSD SAS 200GB, MLC
Solid State Disk, SAS 6Gb/s
Enterprise Performance
Mainstream Endurance *
hot plug/hot replace tray
max. 8/16x per system
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX200 S7
To be used in
SAS SFF (2.5") Base Unit only
see Conf. diagram
to be connected to the PCI based Controller
as long as stock
S26361-F4581-E400
SSD SAS 400GB, MLC
Solid State Disk, SAS 6Gb/s
Enterprise Performance
Mainstream Endurance *
hot plug/hot replace tray
max. 8/16x per system
as soon as available
S26361-F5297-E200 Interface SAS12Gb/s and SAS 6Gb/s.
S26361-F5297-E400 SAS 12Gb/s support is not released
S26361-F5297-E800
S26361-F5297-E160
*) SSD Mainstream Endurance
10DWPD over 5y
Status 2014-01-30
Option D
**) High Endurance
100GB: max 9PB***,
random write
400GB: max 35PB***,
random write
*) Mainstream
Endurance
10DWPD over 5y
Managed Life
Model
20 of 28